Silcoflex 590 single-component low-modulus sealant 300ml - NPT

NptSKU: 305_023_SILCOFLEX59___305_023_0006311

nome_variante: Color
variante_1: Dark brown - 0006311
Price:
Sale priceDhs. 18.00
Availability : 86

Description

Silcoflex 590 single-component low-modulus sealant - NPT

Single-component low-modulus silicone sealant with neutral cross-linking alcoxy for indoor and outdoor applications.

Silcoflex 590 is a single-component low-modulus silicone sealant with neutral cross-linking.

It cures at room temperature under the action of atmospheric moisture to provide a permanently flexible silicone elastomer.

The product has exceptional workability characteristics, adhesion to various substrates, and allows elastic joints for perimeter finishes, glazing, and building applications in high moisture areas, such as bathroom rooms.

Certified and tested according to:

  • EN 15651 – 1: Class 25 LM F - EXT - INT - CC
  • EN 15651 – 2: Class 25 LM G - CC
  • EN 15651 – 3: Class XS1
  • ISO 11600 – G, class 25 LM
  • ISO 11600 – F, class 25 LM – Façade
  • SNJF Label – Vitrage 25E and Façade 25E
  • EMICODE EC 1 PLUS

Fields of application

Sealing of joints on wood, metal and plastic windows and doors.

Sealing of joints on walls, facades and metal constructions.

Suitable for sealing glass windows.

Suitable for joints in bathroom areas.

Features

  • Rapid crosslinking
  • Primerless adhesion to most materials
  • Non-corrosive to metals
  • Suitable for alkaline substrates such as concrete, mortar, fiber cement
  • Contains fungicide, suitable for use in high humidity areas
  • Adheres excellently to glass and metals
  • Odorless
  • Does not drip
  • Excellent resistance to weathering, UV and aging
  • Easy extrusion at low (+5°C) and high (+40°C) temperatures
  • Flexible at low (-40°C) and high (+150°C) temperatures
Appearance Thixotropic paste without casting
Color Gray, white, black, dark brown, transparent
Chemical nature Neutral alcoxy cross-linked silicone
Polymerization Hygrohardening
Thickness curing [mm] (NPT Method 07) (24h - 23°C and 50% RH) ca. 3.0
Shore A Hardness (ISO 868) ca. 22
Specific gravity [g/cm³] (NPT Method 06) (23°C and 50% RH) ca. 1.02
Skin time[min] (NPT Method 17) (23°C and 50% RH) ca. 25
Elastic modulus at 100% [N/mm2 ] (ISO 8339) ca. 0.37
Tensile strength [N/mm2 ] (ISO 8339) ca. 0.7
Tear strength [N/mm2 ] (ISO 34) ca. 4.5
Elongation at break [%] (ISO 8339) > 300
Joint movement capacity [%] (ASTM C920) ± 25 with respect to the width of the joint
Application temperature [°C] +5 to +40
Thermal resistance [°C] -40 to +150

Application

For maximum adhesion performance, the surfaces involved must be dry and clean; in particular, degreasing solvents can be used to remove grease or oil.

Adheres to most surfaces (anodized aluminum, glass, ceramics, polyester).

If there are adhesion problems on particular surfaces, the manufacturer should be consulted for the selection of a specific primer.

The product is not over-paintable.

Remove the threaded top from the plastic nozzle, screw on the nozzle and cut it at an angle to the desired bead thickness and profile.

Insert the cartridge into a manual or pneumatic gun (preferably one with a telescoping plunger) and extrude the sealant carefully, avoiding air entrapment.

Once opened, the packages should be used within a relatively short time.

The optimal operating temperature for both substrate and sealant is between 15°C and 25°C.

Smoothing and finishing should be done within the open time (skin formation time) of the sealant.

Since the system is hygro-hardening, allow sufficient exposure to air.

Bonded elements may require additional sealing or support during the curing period.

Silcoflex 590 should not be used for double-glazing assembly and is not recommended for use on marble, natural stone (may cause halos), applications in insulating or structural glazing, for sealing aquariums, or for long-term use underwater.

Not suitable for food contact applications, in which case use S-Sil Food, ANSI 51 certified.

Equipment cleaning and personal protection

Clean the tools used with white spirit.

Once cured, the product can only be removed mechanically.

Avoid skin contact by using latex, rubber or polyethylene gloves.

If it comes in contact with skin, remove immediately and wash with soap and water.

 

Product storage

Silcoflex 590 can be stored for 12 months in the original packaging.

Storage temperature between 10°C and 25°C in a cool, dry room.

Keep away from sources of moisture, heat sources and direct sunlight contact.

You may also like

Recently viewed