Description
Silcoflex 585 sanitary acetic silicone 300ml - NPT
Mold-resistant acetic silicone sealant for sanitary ware.
Professional product for uses in the sanitation industry, for sealing shower trays and sinks, bathtubs, kitchen sinks and ceramic wall tiles.
Resists mold, bacteria and chemicals in use for cleaning and sanitation.
Characterized by high crosslinking speed.
Not paintable.
Certified and tested according to:
- EN 15651 - 1: Tipo F - EXT - INT - CC;
- EN 15651 - 2: Tipo G - CC;
- EN 15651 - 3: Tipo S;
- ISO 11600 - G, classe 25 LM;
- EMICODE EC 1 PLUS
Application
Sealing of joints on wood, metal and plastic windows and doors.
Sealing of joints on walls, facades and metal constructions.
Suitable for sealing glass windows.
Suitable for joints in bathroom areas.
For maximum adhesion performance, the surfaces involved must be dry and clean; in particular, degreasing solvents can be used to remove grease or oil.
Acetic silicone adheres to most surfaces (anodized aluminum, glass, ceramics, polyester).
If there are adhesion problems on particular surfaces, it is advisable to consult the manufacturer for the selection of a specific primer.
The product is not over-paintable.
Features
- 100% silicone, solvent-free
- Fast curing and skin formation
- Adheres excellently to glass, vitrified surfaces and ceramic tiles
- Specific for areas with high humidity
- Resistant to mold and bacteria
- Does not drip
- Excellent resistance to weathering, UV and aging
- Easy extrusion at low (+5°C) and high (+40°C) temperatures
- Flexible at low (-40°C) and high (+100°C) temperatures
Technical characteristics
| Appearance | Thixotropic paste without casting |
| Chemical nature | Acetically cross-linked silicone |
| Polymerization | Hygrohardening |
| Thickness curing [mm] (NPT Method 07) (24h - 23°C and 50% RH) | ca. 3.0 |
| Shore A Hardness (ISO 868) | ca. 22 |
| Specific gravity [g/cm³] (NPT Method 06) (23°C and 50% RH) | ca. 0.99 |
| Skin time[min] (NPT Method 17) (23°C and 50% RH) | ca. 15 |
| Elastic modulus at 100% [N/mm2 ] (ISO 8339) | ca. 0.4 |
| Tensile strength [N/mm2 ] (ISO 8339) | ca. 0.7 |
| Tear strength [N/mm2 ] (ISO 34) | ca. 4.5 |
| Elongation at break [%] (ISO 8339) | ca. 250 |
| Joint movement capacity [%] (ASTM C920) | ± 25 with respect to the width of the joint |
| Application temperature [°C] | +5 to +40 |
| Thermal resistance [°C] | -40 to +150, in the short term up to +120 |
Equipment cleaning and personal protection
Clean the tools used with white spirit.
Once cured, the product can only be removed mechanically.
Product storage
Silcoflex 585 can be stored for 24 months in the original packaging.
Storage temperature between 10°C and 25°C in a cool, dry room.
Keep away from sources of moisture, heat sources and direct sunlight contact.